MDM-BTG

SHARP FO-6600 DUAL LINE MULTIFUNCTIONAL FAX
	A powerful high volume solution for businesses whose communications are mission critical. Equipped with two Super G3 fax modems, an advanced processor, and 1150 sheet paper capacity, the efficient FO-6600 can reduce phone time, increase productivity, and lower operational costs.

The FO-6600 Multifunctional Fax

Applicable Telephone Line:

Public switched telephone network (PSTN)

Compatible:

ITU-T (CCITT) G3 mode

Configuration:

Half-duplex, desktop transceiver

Compression Scheme:

MH, MR, MMR

Memory Size*:

2 MB (approx. 108 pages with ECM off)

Memory Option:

1 MB (approx. 64 pages)
2 MB (approx. 128 pages)
4 MB (approx. 256 pages)
16 MB (approx. 1026 pages)

Scanning Method:

Flatbed, solid-state CCD

Resolution:

Horizontal:

203 lines/inch (8 lines/mm)

Vertical:

Standard: 98 lines/inch (3.85 lines/mm)
Fine/Halftone: 196 lines/inch (7.7 lines/mm)
Superfine: 392 lines/inch (15.4 lines/mm)

Printing Density:

Horizontal:

404 lines/inch (15.9 lines/mm)

Vertical:

396 lines/inch (15.5 lines/mm)

Reception Modes:

Auto/Manual switching

Modem Speed*:

33,600 bps with automatic fallback (Z Modems)

Transmission Time*:

Approx. 3 seconds

Input Document Size:

Automatic feeding:

Width: 5.8 to 11" (148 to 280 mm)
Length: 5.0 to 14.3" (128 to 364 mm)

Manual Feeding:

Width: 5.8 to 11" (148 to 280 mm)
Length: 5.0 to 17.0" (128 to 432 mm)

Paper Size:

Width: 8.5" (218 mm)
Length: 11-14" (280-356 mm)

Paper Capacity:

1150 sheets

Automatic Document Feeder:

50 sheets max.

Effective Scanning Width:

10.1" (256 mm)

Effective Recording Width:

8.2" (203 mm)

Copy Function:

Single/Multicopy/Sort-copy (99 copies/page)

Telephone Function:

Standard

Halftone (gray scale):

64 levels

Power Requirements:

120 V AC, 60 Hz

Operating Temperature:

50 - 86�F (10-30�C)

Power Consumption:

Stand-by: 10 W, ENERGY STAR^�Compliant
Maximum: 400 W

Dimensions:

Width: 27.2"
Depth: 23.4"
Height: 23.8"

Weight:

63.8 lbs.

*Transmission speeds will vary based on line type and condition.

*Based on ITU-T Test Chart #1 at standard resolution in Sharp special mode, excluding time for protocol signals (i.e., ITU-T phase C time only)

As an ENERGY STAR^� partner, SHARP has determined that this
product meets the ENERGY STAR^� guidelines for energy efficiency.